Back to product family

Product information

FSTA G1/2-AG 90

Part no.: 10.01.02.00579

Spring plunger with both-way damping and height compensation

Suction cup connection	G1/2"-M
Vacuum connection	G3/8"-F
Spring stroke Z	90 (mm)
Tightening torque (max)	50 (Nm)

Product information

Design Data

Design image

Attribute	Value
G1	G3/8"-F
G2	G1/2"-M
G3	M30x1.5-M
H	229.5 mm
H2	125.5 mm
LG1	12 mm
LG2	10.5 mm
LG3	55 mm
SW1	36 mm
SW2	24 mm
SW3	24 mm
Z (Stroke)	90 mm

Technical Data

Attribute	Value
Spring rate	1.07 N/mm
Spring pretension	24.38 N
Spring force center	75.3 N
Vertical load	4,900 N
Horizontal load	730 N
Tightening torque (max)	50 Nm
Weight	645 g
Operating temperature	0 ... 80 °C
Product family	FSTA

Note: Spring force: Referred to 50 % of operating stroke Vertical loading: Maximum static loading Horizontal stress: The specification of the horizontal stress refers to the lower edge of the plunger with extended spring. It is a maximum static stress and it impairs the spring compression and extension in horizontal position

Documentation

Accessories

FLK G1/2-IG G1/2-AG

FLK G1/2-IG G1/2-AG 10.01.03.00175 Flexible suction cup mounting for adaptation to sloping surfaces

Thread G1	G1/2"-F
Thread G2	G1/2"-M
Operating temperature	0 ... 70 °C

FLK G1/2-IG G1/2-AG V

FLK G1/2-IG G1/2-AG V 10.01.03.00207 Flexible suction cup mounting for adaptation to sloping surfaces

Thread G1	G1/2"-F
Thread G2	G1/2"-M
Operating temperature	0 ... 70 °C
Shape mounting elements	reinforced

HTR-STA 62 1N D30 WI

HTR-STA 62 1N D30 WI 10.08.03.00148 Holder for flexible mounting of suction cups/spring plungers on sections

Length L	62 (mm)
Connection 1	Sliding block
Suction cup or spring plunger connection	Contour D30-G1/2
Shape	angled

HTR-STS 40x40 D30 WI

HTR-STS 40x40 D30 WI 10.08.03.00090 Holder for flexible mounting of suction cups/spring plungers on square tubes

Connection 1	40x40
Suction cup or spring plunger connection	Contour D30-G1/2
Shape	angled

HTR-STS 50x50 D30 WI

HTR-STS 50x50 D30 WI 10.08.03.00091 Holder for flexible mounting of suction cups/spring plungers on square tubes

Connection 1	50x50
Suction cup or spring plunger connection	Contour D30-G1/2
Shape	angled

HTR-STS 60x60 D30 WI

HTR-STS 60x60 D30 WI 10.08.03.00092 Holder for flexible mounting of suction cups/spring plungers on square tubes

Connection 1	60x60
Suction cup or spring plunger connection	Contour D30-G1/2
Shape	angled

KGL G1/2-IG G1/2-AG

KGL G1/2-IG G1/2-AG 10.01.03.00111 Suction cup mounting with joint for adaptation to sloping surfaces

Thread G1	G1/2"-F
Thread G2	G1/2"-M
Height H	40 (mm)

ST G3/8-AG 13 MS-V

ST G3/8-AG 13 MS-V 10.08.03.00160 Hose sleeve

Thread G1	G3/8"-M
Hose inner diameter (recom.) d	13 (mm)
Material	Brass
Surface	nickel plated
Length L	5.9 (mm)
Nominal diameter dn	10 (mm)

ST G3/8-AG 9 MS-V

ST G3/8-AG 9 MS-V 10.08.03.00159 Hose sleeve

Thread G1	G3/8"-M
Hose inner diameter (recom.) d	9 (mm)
Material	Brass
Surface	nickel plated
Length L	6 (mm)
Nominal diameter dn	7.4 (mm)

STV-GE G3/8-AG 10

STV-GE G3/8-AG 10 10.08.02.00252 Push-in Fitting, straight

Thread G1	G3/8"-M
Outer hose diameter	10 (mm)
Material	Brass
Operating temperature	-20 ... 80 °C
Outside diameter D	16.5 (mm)
Length L	20.1 (mm)

STV-GE G3/8-AG 12

STV-GE G3/8-AG 12 10.08.02.00209 Push-in Fitting, straight

Thread G1	G3/8"-M
Outer hose diameter	12 (mm)
Material	Brass
Operating temperature	-20 ... 80 °C
Outside diameter D	19.5 (mm)
Length L	23.6 (mm)

STV-GE G3/8-AG 14

STV-GE G3/8-AG 14 10.08.02.00211 Push-in Fitting, straight

Thread G1	G3/8"-M
Outer hose diameter	14 (mm)
Material	Brass
Operating temperature	-20 ... 80 °C
Outside diameter D	21.5 (mm)
Length L	30.5 (mm)

STV-GE G3/8-AG 8

STV-GE G3/8-AG 8 10.08.02.00237 Push-in Fitting, straight

Thread G1	G3/8"-M
Outer hose diameter	8 (mm)
Material	Brass
Operating temperature	-20 ... 80 °C
Outside diameter D	14.6 (mm)
Length L	17.4 (mm)

STV-W G3/8-AG 10

STV-W G3/8-AG 10 10.08.02.00255 Push-in Fitting, swivelling elbow

Thread G1	G3/8"-M
Outer hose diameter	10 (mm)
Material	Nickel plated
Operating temperature	-20 ... 80 °C
Length L	35.1 (mm)

STV-W G3/8-AG 12

STV-W G3/8-AG 12 10.08.02.00163 Push-in Fitting, swivelling elbow

Thread G1	G3/8"-M
Outer hose diameter	12 (mm)
Material	Nickel plated
Operating temperature	-20 ... 80 °C
Length L	34.1 (mm)

STV-W G3/8-AG 8

STV-W G3/8-AG 8 10.08.02.00236 Push-in Fitting, swivelling elbow

Thread G1	G3/8"-M
Outer hose diameter	8 (mm)
Material	Nickel plated
Operating temperature	-20 ... 80 °C
Length L	23.7 (mm)

STV-WF G3/8-AG 10

STV-WF G3/8-AG 10 10.08.02.00259 Push-in Fitting, swivelling and lockable

Thread G1	G3/8"-M
Outer hose diameter	10 (mm)
Material	Nickel plated
Operating temperature	-10 ... 70 °C
Length L	29.2 (mm)

STV-WF G3/8-AG 8

STV-WF G3/8-AG 8 10.08.02.00234 Push-in Fitting, swivelling and lockable

Thread G1	G3/8"-M
Outer hose diameter	8 (mm)
Material	Nickel plated
Operating temperature	-10 ... 70 °C
Length L	26.7 (mm)