Bell-shaped suction cups (oval) for best adaptation to curved and oiled surfaces

Dimensions (LxB)80 x 30
Suction cup materialNitrile rubber NBR
Material hardness [Shore A]45 Shore A
Nipple materialAluminum
ConnectionG1/4-AG
SAOG 80x30 NBR-45 G1/4-AG
Attribute Value
Bmax(S) 36 mm
Bs 30 mm
dn 5 mm
G1 G1/4"-M
H 27.50 mm
LG1 10.50 mm
Lmax(S) 86 mm
Ls 80 mm
SW1 17 mm
Z (Stroke) 10 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Attribute Value
Suction force (-600mbar) 105 N
Lateral force 65 N
Lateral force (oily surface) 45 N
Volume 13.20 cm³
Curve radius (min) (convex) 20 mm
Hose diameter (empf.) d 4 mm
Dimensions (LxB) 80 x 30
Suction cup material Nitrile rubber NBR
Weight 33.60 g
Number of folds 0
Product family SAOG


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

Ordering information: SAOG 80x30 NBR-45 G1/4-AG

Suction cup SAOG, available in various diameters, is delivered with connection nipple vulcanized to elastomer part.