FMP-i-SVK 1234 3R18 O20 G60

Part no.:

Intelligent area gripping system for external vacuum generator, with ball check valves

Length L1,234 mm
Length L11,238 mm
Width B130 mm
Material typeFoam O, Height 20 mm
construction shape fittingsStraight
External diameter D60 mm
Add. function1x Contr.-val. vacuum/blow off
Max. air consumption blow off800 l/min
Construction shape vacuum switchNormally open
Weight5.8 kg
Product familyFMP
FMP-i-SVK 1234 3R18 O20 G60
Attribute Value
B 130 mm
B3 21.60 mm
D 60 mm
H 80 mm
H1 116 mm
H2 20 mm
H3 7.70 mm
H4 5.50 mm
H5 46 mm
L 1234 mm
L1 1238 mm
L2 1194 mm
L3 80.90 mm
Y1 90 mm
Valve type SVK

Note: Vacuum hose with internal diameter equal to dimension D required. See Technical Data -> Shape
Attribute Value
Arrangement 3R18
Material type Foam O, Height 20 mm
Number of suction cells 197
Suction force at -250 mbar 1650 N
Add. function 1x Contr.-val. vacuum/blow off
Weight 5.80 kg
Sealing element Sealing Foam
Evacuation rate for pu = -0,25 bar 900 l/min
Product family FMP

For compressed air with 5.5 bar input pressure At -0.25 bar and with the gripper fully covered by a workpiece typical for the application (wooden board with structured surface) The external vacuum generator used must supply at least the specified suction flow (at the vacuum connection piece of the FMP) at -0.25 bar but max. 135 % of the specified suction flow
The matching software for this product is available in this section.