Vacuum Tube Lifters JumboSprint EX

Safe Handling in an Explosion Protection Zone

Ex
MAX. 250 KG

Application

Fast and frequent lifting and moving of compact workpieces up to 250 kg in ATEX zone 2/22 and up to 85 kg lift capacity in ATEX zone 1/21
Handling of workpieces such as bags, barrels, buckets, jugs and rubber bales in explosion protection zones
Ensures efficient material flows during loading or unloading of mixing machines
Circumferential operator handle for optimal transfer of force and guidance of the device
Modular design and extensive gripper and accessories program for implementing individual requirements
Increases employee motivation and minimizes work-related musculoskeletal disorders
Complete system with tube lifter and steel jib crane for explosion protection areas available
Can be used throughout Europe without country-specific certificates thanks to certification according to ATEX Directive 2014/34/EU
Awarded the seal of approval by Aktion Gesunder Rücken e. V.
Schmalz vacuum lifters and crane systems support the back and musculoskeletal system when lifting light and heavy loads. They reduce stress and help to make the working environment ergonomic. This is confirmed by the independent association Aktion Gesunder Rücken e. V. (AGR) with its seal of approval.

(1) Vacuum generator - blower or ejector for special Ex version

(2) Jib crane with steel crane rail

(3) Vacuum tube lifter JumboSprint EX

 

Explosion zone Vacuum generator Max. lifting stroke Max. lift capacity
    [mm] 45 kg 65 kg 85 kg 110 kg 140 kg 200 kg 250 kg
1/21 Ejector 1,700 / 2,100 X X X        

2/22

 

Ejector

Blower

1,700 / 2,100

1,700 / 2,100

X

X

X

X

X

X

 

X

 

X

 

X

 

X

 

The following technical data are standard values.

Workpiece format*
Min [mm]
Workpiece format*
Max [mm]
Max. lifting
speed [m/min]
Max. lifting stroke
Z [mm]
Height
H** [mm]
Operator handle
length L [mm]
300x200 3,000x1,000 60 1,700 2,850 250-500
300x200 3,000x1,000 60 2,100 3,400 250-500

*Depends on the vacuum gripper chosen
**Vacuum gripper not included (total height = H + height of the vacuum gripper)

Handling Systems in Action
See our handling systems in real processes.