Back to product family

Product information

FSTIm M5-IG 6/4 L 10 IN

Part no.: 10.01.02.01338

Spring plunger with internal damping spring and height compensation

Suction cup connection	M5-F
Product family	FSTIm
Shape	Lateral vacuum guide
Spring stroke Z	10 (mm)
Shape mounting elements	(electrically) insulating
Tightening torque (max)	4 (Nm)

Product information

Design Data

Design image

Attribute	Value
B	23.2 mm
D	4 mm
dn	2.5 mm
G2	M5-F
G3	M10x1-M
H	49 mm
H2	21 mm
LG2	5.5 mm
LG3	26 mm
SW1	14 mm
SW2	13 mm
Z (Stroke)	10 mm

Recommendation: Avoid maximum plunger stroke Z during continuous operation to extend service life Ensure that the hose guide is free from distortion

Technical Data

Attribute	Value
Shape mounting elements	(electrically) insulating
Spring rate	0.05 N/mm
Spring pretension	0.5 N
Spring force center	0.75 N
Vertical load	15 N
Horizontal load	10 N
Tightening torque (max)	4 Nm
Weight	18 g
Operating temperature	0 ... 80 °C
Product family	FSTIm

Note: Spring force: Referred to 50 % of operating stroke Vertical loading: Maximum static loading Horizontal load: The specification of the horizontal load refers to the lower edge of the plunger with extended spring. It is a maximum static stress and it impairs the spring compression and extensionin horizontal position.

Documentation

Accessories

VSL 6-4 PU BL SO

VSL 6-4 PU BL SO 10.07.09.00141 Compressed-air hose

ST M5-AG 4 MS-V

ST M5-AG 4 MS-V 10.08.03.00311 Hose sleeve

Thread G1	M5-M
Material	Brass
Surface	nickel plated

HTR-STA 47 1N D10/16 FL

HTR-STA 47 1N D10/16 FL 10.08.03.00085 Holder for flexible mounting of suction cups/spring plungers on sections

Length L	47 (mm)
Connection 1	Sliding block
Suction cup or spring plunger connection	Contour D10 and D16
Shape	flat

HTR-STS 30x30 D10/16 WI

HTR-STS 30x30 D10/16 WI 10.08.03.00088 Holder for flexible mounting of suction cups/spring plungers on square tubes

Connection 1	30x30
Suction cup or spring plunger connection	Contour D10 and D16
Shape	angled

HTR-STS 40x40 D10/16 WI

HTR-STS 40x40 D10/16 WI 10.08.03.00089 Holder for flexible mounting of suction cups/spring plungers on square tubes

Connection 1	40x40
Suction cup or spring plunger connection	Contour D10 and D16
Shape	angled

Product recommendations

Compact Ejectors SCPMb / SCPMc / SCPMi

Compact Ejectors SCPMb / SCPMc / SCPMi

Suction capacity up to 28 l/min
Max. vacuum: 92 %
Main body made of plastics

Vacuum / Compressed Air Hoses VSL

Vacuum / Compressed Air Hoses VSL

External/internal diameters from 4/2 to 87/75
Material: PA, PE, PU, PVC

Flat Suction Cups SUF

Flat Suction Cups SUF

Diameter: 1 to 100 mm
Material: NBR, NBR-ESD, SI, SI-CO, HT1, EPDM-ECO